Tilemaster Fast One Coat DPM

Description

Tilemaster FAST One Coat DPM

Tilemaster FAST One Coat DPM is suitable for a wide range of substrates, including concrete, sand/cement, anhydrite/calcium sulphate screeds and over underfloor heating systems. During mixing, the tin’s bottom section is unclasped and poured into the larger top section for ease of use. One coat is then poured and applied with a trowel or roller. Once dry, the smooth, glossy surface provides effective resistance to water, grease, oil, dilute mineral and organic acids. Smoothing compounds can be applied after 4-5 hours drying time. If a structural DPM is ineffective or not present, an additional coat is applied.

Tilemaster FAST One Coat DPM is a solvent-free, epoxy-based product that cures in just 4-5 hours. The two-component system can be used on surfaces with a relative humidity of up to 98% and can be installed where no structural DPM is present.